unlock

How to unlock a car door (without a key)



Sharing buttons:

locking your keys inside the car sucks in this video I'm going to unlock three

different vehicles using different methods and tools to help you figure out

what method works best for your car. First make sure you have proof it is

your car or whoever you're helping can prove it is their car. Check every door,

window, trunk or tailgate, and glass! You just might get lucky. Our first vehicle

has a vertical knob on top of the door panel and the most accessible tool

you're most likely to have on you is a shoelace or a string. Make sure it is

long enough to cover the window diagonally. Step number one - slide the

string in through the top corner of the door. Tip: now when you go to fit the

string in you might run into weather stripping and rubber molding that

doesn't let you get past it, so use a thin object to guide the string in over

the rubber molding. Step number two: once the string is inside move it to one side

of the window and make a slip knot

here's a better view of how to make one: basically it's like tying your shoe - you

pull on one side it tightens your knot you pull on the other side it tightens

your loop. Now pull the slip knot into the window area and try to fit it over

the knob

Here is a tip: if your loop is pointing away from the knob you can twist the string

and slide the twisted part into the window area and then pull back to make

the loop point in the right direction, like this! Once you put the loop over the

knob pull the string ends apart to tie the

knot and pull up and there we go the first car is unlocked

next tool we can use is a wire hanger or any long wire you can find very helpful

tool you can use it in many different applications unwind the hanger and

straighten it out leaving a hook on one end. Now let's take a closer look at our

knob - all it really is, is just a rod going down to the latching mechanism

so what I'm gonna do is let the hook down between the window and the

weatherstripping which I do recommend removing to get a

better visual of what's inside the door catch the rod or the part of the

latching mechanism it is attached to and pull up and the door is unlocked

another useful tool is a slim jim basic concept: Pull on one side and push on the

other to navigate the loop that you would slide over a vertical knob.

Same basic steps you may have to pry the door a little bit

slide the slim jim down, fit it over the knob and pull up. I personally don't

really care for this tool, I think it has very limited application.

However the door is unlocked and let's move on to the second vehicle this vehicle does not

have a vertical knob, the locking knob moves horizontally and is significantly

harder to get to but take note - pulling the door handle unlocks the door!

And we also have a manual window which could be used to our advantage

And now again let's take a closer look at our locking knob: all it is - is just

another rod that goes to the latching mechanism moving horizontally instead of

vertically here I took the latching mechanism out of the

door so you can see that there is a black piece moving up and down as I move

the rod back and forth. So all we need to do is pull up on it and the door will be

unlocked. While I'm trying to catch the mechanism I wanted to mention that your

wiper blades (except curved ones) have metal rods in them that you can use for

this method just pull the blade end down to get them exposed. You may have to use

pliers to pull one out, bend it to make a hook and you're ready to go!

Now back to our board: I finally caught the mechanism and all I

need to do is pull up and the second car is unlocked

Now since the inside handle unlocks the door, we can try to utilize that too

let's grab the other end of our wire hanger and make a loop about a finger in

size make sure to twist it a few times so

that it doesn't unwind when you pull on it

next pry the top corner of the door and fit a wedge in it. I am using a small ice

scraper to get it started and a wooden wedge you can use a doorstop or some

wooden kitchenware like spatulas and such try not to use screwdrivers as they

will damage your paint. Basically you're just trying to create an opening just

big enough to fit in the wire

once the wire is in throw the loop over the handle and here I want to share

another tip with you: once you're on the handle - bring the wire down so that

you're pulling straight back, instead of half up - half back

And there we go! That sweet sound of the door finally opening. And let me play this one more time!

And finally our third and most difficult car: It has no

vertical knob, it does have a "lock/unlock" button but pretty hard to get to

the locking tab is cone-shaped and the door handle does not unlock the door

- pretty tricky. On top of it, it has cables instead of rods, so nothing to really

grab on to. So the easiest thing to do here is to use an actual lockout toolkit

used by professionals which consists of: a long reach tool, inflatable bag, and a

wedge tool. Since this door doesn't have a metal frame around the glass I'm going

to use the inflatable bag - wedge it in, inflate it, give yourself some room to

fit the metal rod through. Don't pry it more than you have to - you don't want to

shatter the glass, obviously.

then just fit in the rod and here you have two options: you can either push the

unlock button or turn the locking knob. Now while I'm trying to get it unlocked

I wanted to mention even though most of you probably don't have a tool kit like

this handy you can try to imitate it with something like an antenna or a hood

prop rod from another car of course I've seen people use golf clubs the bottom

line is there are options so don't get discouraged and use your imagination.

And there we go, our third car is unlocked!

now I am going to try to turn the locking knob

Thanks to the rubber tip, it takes no time to execute. And again that sweet sound of the door opening

You can also use this tool to open manual windows, push locking tabs, and pull on

door handles. Now this should be enough for one video, if it was helpful please

give it a thumbs up in the next video I'm going to talk more about unlocking

this Subaru and other cars using a less conventional approach and about

preventing yourself from being locked out thank you for watching good luck and

take care