How to cut 45 Degree Angle On Skirting Board
Cut 45 degree corner skirtingboard, how I cut an external mitre, outside corner on skirting boards.
0:00 / 0:00
Quality:
Sharing buttons:
[Music]
hello everyone
adrian from ask how tube again about a
month ago a few weeks ago i
uploaded a video fitting skirting boards
and
somebody commented that uh we didn't see
how you cut an angles
and it's true i'm really sorry i really
miss that
when i'm working i'm just
sometimes i forget to film step by step
but yeah it's true
so um i apologize for that because
on the title of the video i said uh this
is how i fit skirting board how i cut in
angles but there's no
anything to show you how i cutting
angles so
i have a job now which i'm fitting
skirting boards so in this video i'll
show you
exactly how i cut with the meter so
on 45 degree or if you don't have meter
saw with a
cordless circular uh
by hand probably is possible i'm not
sure but i don't think will be easy
but i'm gonna show you two ways how i
cut the
skirting board on angles
so this is the skirting board and
what i'm doing we need here to cut at 45
[Music]
so
we have to take it here at 45 degrees
[Music]
you have to make sure it's in line here
and here is touching
the edge
[Music]
[Music]
[Music]
so
[Music]
now when you measure the length you
don't measure from here
you measure from here
[Music]
[Music]
[Music]
so we have inside 45 db cut here
inside here
[Music]
so when we cut with this we have to do
something
first of all we need 45
like this so you need to allow minimum
two centimeters just
to make sure a little more than with a
low pressure
[Music]
then you need to make sure it's 90
degree
mark is proper
[Music]
now you have to set this up at 45.
[Music]
so
okay now with the metres so you don't
have to worry about the line
but now you need to watch the line and
follow the line
[Music]
[Music]
[Music]
so
[Music]
so
[Music]
i know it's not the same shape that i
just want to show you
[Music]
so that's the way you do it
okay so skirting board is done
you just need some good filler at the
edges
thanks for watching good luck with your
projects
[Music]
you
