How to bleed Brake Calipers
⫷ How to easily Bleed Air Out of Brake Caliper ⫸
0:00 / 0:00
Quality:
Sharing buttons:
thanks for checking out the Scotties
hobbies today gigi is gonna help me
bleed the brakes on the XB that we're
doing this process will be the same if
not similar to many other brakes so what
you're really doing is just bleeding the
hydraulic system before you get started
make sure you top off for the reservoir
I usually put a little bit lower past
the full line and then I start bleeding
after you're done waiting make sure you
check the res where that is full well I
am gonna have GG help me what she is
gonna do is pump the brakes you're gonna
press on the pedal three times but when
I get in there I'm gonna tell you to go
and what are you gonna do three times
and then
and when the pressure goes down what are
you gonna do yeah so um you're gonna say
one two three I'm holding and then I'm
gonna open it up and it's gonna go down
a little bit right okay and then I'll
say pump in what are you gonna do all
right so you ready let's go
are you ready over there G go ahead and
pop it pop it again again
one more time one alright does it feel
really hard okay you're good thank you
I still be bled out this system four
times got all the air out of it like I
said make sure you top off the reservoir
not as to the pool line when we're all
said and done if periodically check it
while you're pumping the grapes that
we're thinking it too but it's real
simple real easy remember to like
subscribe and share
it's really key we'll see we'll see how
the next hopefully helpful video
