How to bleed A Clutch Master Cylinder By Yourself
HOW TO BLEED A CLUTCH BY YOURSELF
0:00 / 0:00
Quality:
Sharing buttons:
what's going on guys I want to do a
quick tutorial for you guys for anybody
that wants to do any kind of break
bleeding clutch bleeding or anything and
you have nobody with you
it's very really cheap to do super easy
to do and I just want to show you guys
this because I am doing my hydraulic
throw bearing right now for my twin disk
so obviously you want to make sure this
is always full and so the main part of
this alright so here this is where my
bleeder is now this is probably it's
gonna be for wherever your bleeder is it
could be on your sleeves longer or
whatever I have a stainless line that
comes out my bleeder is here so you're
gonna get a little hose and a bottle
okay so just drill a hole in the lid of
the bottle or something fill up the
bottom of it with brake fluid do dot
three or whatever you're using to bleed
make sure the bottom of the hose is
submerged and then make sure the other
hose the other end is actually on top it
sits over the bleeder so what this does
is when you open the bleeder and this is
submerged when you press the when you
when you press the clutch and you pump
it so you pump it in and out the air
comes out and comes into the bottle and
when you pull it back out it sucks fluid
in so you just continue to do that and
make sure you keep the reservoir full
and as you do that the air will come out
and eventually there will be no more
bubbles and then you can tighten the
bleeder and your clutch will be blood or
your brakes will be blood it's really
that easy it's super easy there's no
more build up the pressure open the
thing and spray everything with brake
fluid you don't have to do that but the
super simple here's what's happening so
when I press the clutch as you guys
watch this you guys can watch you see
the bubbles alright and you'll continue
to do this until there are no bubbles
when there are no more bubbles that
means that the system is bled you always
got to make sure that this is fooled oh
you don't want to ever let it run empty
it runs empty obviously more air is
gonna be in the system
oh yeah just spill it everywhere all
right so once you guys get that done
make sure you fill the reservoir back up
for one you don't wanna like leave it
empty and make sure whenever you're done
don't leave the pedal in pull the pedal
back out because if you leave the pedal
in you will actually put vacuum on the
system and these slave cylinder will not
function okay now that it's bled press
it press it pushes my hand here after
you guys can see it you guys can see it
is working really functional now I gotta
put a bug clutch pedal stopper in so
that way I don't destroy my bearings or
anything else anyways it was super super
short tutorial I wanted to get this done
because I'm doing it right now and I
don't want to have to you know I don't
want to just pop open my fluid and have
to redo it again for no reason but
anyways I hope you guys enjoyed this if
it helped you hit the like button
subscribe if you're new and comment let
me know what you think if you have any
questions I'll let you know answer
everything I'm always looking in the
comments so yeah as always I'll catch
you guys in the next one later
[Music]
