How to bleed A Baseboard Radiator
How To Bleed Trapped Air From Baseboard Heater
0:00 / 0:00
Quality:
Sharing buttons:
in this video I'm going to show you how
to bleed a baseboard heater one reason
why you might want to do this is if you
might if you're on the second floor and
the wood and you're upstairs isn't
getting height maybe you made like a
recent repair something like that
upstairs in the water supply line there
could be an air pocket in the system so
I'll show you how to bleed out the air
out of the baseboard if the Isaiah
trapped inside the V baseboard and like
a high level house or it could even be a
lower level too but typically it
sentence the fines weights like the
highest point so show you how to do that
and it's pretty easy to do alright so
what you can do is take the cover off of
your base wood and it should just pull
off a little little clips and you can
pry it away and then here you're going
to see is this should be a bleeder valve
not all baseboards going to have this if
somebody put you base bullet in with
just regular 90s this isn't going to
work for you if you have a bleeder cap
on it like this then you can try this
method to get the trapped air out of the
baseboard so all you're going to do is
these usually thumb tight you just turn
it with your thumb in what happens as
you'll see water shooting out you know
you want to turn the temperature up in
the house so that's a lot of stuff's to
circulate and when you turn this cap
water a shoot out you're going to want
to get a bowl so that you can shoot the
water into the bowl
and once all the air shop the air is out
of the beast' Boyd you can turn the cap
and shut it off so I'm not actually
going to do it with this one because
everything is working perfectly and I
don't want a mess of it and they have
hardwood floors right under it so I just
kind of wanted to tell you this video
what's the look for
