For the best results when folding your LED strips, follow these simple steps to
make the most of your LED lighting. First lay out your strip and identify where the
fold will be made. You want to make sure that you do not bend any diodes,
resistors, or soldered joints. You will now begin by folding the Flex back at a
45 degree angle in the direction opposite the corner you need to round.
Then you will bend the flex back on itself in the proper direction to create
a 90 degree angle. Lastly you will press firmly to crease the strip. If desired you
can use a dab of super glue to secure the fold in place, however, once you peel
the adhesive backing, that should be enough. And there you go!
A simple way to bend your LED strip