attach

How To Install A Command Hook-Hang Stuff On The Wall



Sharing buttons:

hey everybody I'm here today to show you

how to install a command hook now this

is a command hook and it is awesome

because it allows you to hang a hook on

the wall and to place a hook on the wall

without using any screws and it can also

be removed fairly easily without

damaging the wall so let's get right to

the installation process you can see

that it has two pieces the hook piece

and then the piece that actually gets

mounted onto the wall we are going to

separate those two pieces just like that

okay you're going to leave the hook to

the side and I will be using it you know

shortly in the video so now we have the

adhesive portion now on one side it says

wall side and on the other side it just

it just says command the brand it has

the logo so basically what we need to do

is we need to stick the piece one side

of this to the actual to this portion

right here this plastic piece so

obviously we don't need to stick the

wall side to this piece we need to stick

the other side so we are going to peel

off this red side and we are going to

stick this plastic piece not the side of

the plastic piece with this on it the

flat plastic piece of the flat side of

the plastic piece we are going to stick

it to to the this piece now there's a

non sticky part okay you are not going

to stick it on the non sticky part and

the non sticky part should be on the

same side as this little indentation in

the plastic just like that okay I'm

holding the non sticky part just going

to push it on like that and hold it down

for about 30 seconds something like that

just to really get it to stick in place

I'm just going to hold this I'm going to

hold this down for about 30 seconds in

total and I'm just rubbing it to make

sure that it sticks all right next we

are going to peel off the piece where it

says wall side so we're just going to

peel this off just like that

and that will expose the adhesive on

this side and now we are going to place

it on the wall with the non-adhesive tab

with this part right here that is not

sticky facing downwards

we're going to place it on the wall

wherever we want to hang the hook

alright so I am just going to be placing

this on the wall right here because this

is where I want to hang the hook I'm

just going to hold it in place for about

30 seconds to make sure that the

adhesive grips onto the wall and once

again this tab right here is at the

bottom I'm putting it at the bottom so

I'm just going to hold this in place

applying a little bit of pressure for

about 30 seconds alright now that the

backing is in place I am simply going to

take the hook and we are going to

basically install the hook onto this so

to do that we just literally get this

little tab right here and put it in this

in this open section just like that and

then slide I'll do that again sorry I

was a little bit off-camera get that tab

put it in the open section and then just

slide it downwards slide the hook

downwards just like that and that's

basically it as you can see I have

installed the command hook it is a

fairly simple process and I've walked

you through it in a step-by-step manner

and just a quick note make sure that you

allow this to stay in place for an

adequate amount of time before you

actually hang something on it just to

make sure you know basically leave it

without any weight on it for a decent

amount of time I would say about a now a

1 hour give or take and before you hang

anything on it or put any weight on it

and that's basically it I just wanted to

show you how to install a command hook

and that's all I have for you today

thanks for watching